国产一区视频在线观看-国产重口老太和小伙-亚洲v高-中文岛国精品亚洲一区亚-免费a级毛片出奶水-黄网站入口

  • «
  • 1
  • 2
  • 3
  • »
  • Pages: 1/3     Go
liu2004
級別: *
精華主題: * 篇
發帖數量: * 個
工控威望: * 點
下載積分: * 分
在線時間: (小時)
注冊時間: *
最后登錄: *
查看liu2004的 主題 / 回貼
樓主  發表于: 2011-05-04 20:42
要的請留郵箱,太大。
                  


Motion Controller Peripheral Software Package
SW6RNC-GSVHELPE
-------------------------------------------------------------------------


Thank you for purchasing this software.
You should carefully read the following terms and conditions
before using this software. And that you can refer the manuals
of WindowsNT/98/2000/XP to resolve the basic operation of
Windows NT/98/2000/XP.

1. Operating requirements

  (a) Hardware requirements
    ?  100% WindowsNT/98/2000/XP compatible PC/AT
            (not support multi-processor)
    ?   CPU :
                Windows NT/98 : Pentium 133-MHz or more recommended
                Windows 2000  : Pentium II 233-MHz or more recommended
                Windows XP    : Pentium II 450-MHz or more recommended
                 (Pentium II 233-MHz or more for Windows 2000)
    ?   Memory : It depends on the OS environment.
                Windows NT/98 : 32 MB or more recommended.
                Windows 2000  : 64 MB or more recommended.
                Windows XP    : 192 MB or more recommended.
    ?   Free disk: 68 MB or more
    ?   Monitor resolution: SVGA(800*600/256 Colors) or more


  (b) OS requirements
    ?   Windows NT Workstation Ver. 4.0(Service Pack2 or later)
    ?   Windows 98
        ?   Windows 2000
        ?   Windows XP Professional
        ?   Windows XP Home Edition

        * The following Windows version is not supported.
            ? Windows NT 3.5 Workstation
        ? Windows NT 3.51 Workstation
            ? Windows NT Server
            ? Windows 95
        * In Windows NT 4.0,the use needs Microsoft Internet Explorer 3.01
          or higher.

2. Installation method

  First, close any others applications running on Windows NT/98/2000/XP.

  From [Start] select [Run...],input "X:setup.exe"(X: CD-ROM Drive)
or click [Browse] and select "Setup.exe" from the CD-ROM drive.
  After starting the installor , follow the instructions of the installor.

3. Notice

(1) When you install this software to a drive which is compressed by
DriveSpace or other tools, if it freezes in installation, please increase
the free space of the drive or select other drive which is not compressed
to install this software.

(2) If you want to change the installation destination or reinstall it,
please uninstall it before installing it again.

(3) Depending on the system font size of Windows NT/98/2000/XP, sometimes
the screen may not be displayed properly, please use a small size font.



-------------------------------------------------------------------------------------

Microsoft and MS-DOS, Windows, Windows NT are registered trademarks of
Microsoft Corporation in the United States and other countries.

Copyright(c) 2001 MITSUBISHI ELECTRIC CORPORATION All Rights Reserved.
zhang850412
有可以拔13570997576 張工
級別: 工控俠客
精華主題: 0
發帖數量: 256 個
工控威望: 2209 點
下載積分: 13860 分
在線時間: 1092(小時)
注冊時間: 2009-07-19
最后登錄: 2025-07-22
查看zhang850412的 主題 / 回貼
1樓  發表于: 2011-05-04 22:35
謝謝樓主…172492590@qq.com
zyfzxh
級別: 論壇版主

精華主題: 12 篇
發帖數量: 6507 個
工控威望: 7515 點
下載積分: 110271 分
在線時間: 4852(小時)
注冊時間: 2006-08-10
最后登錄: 2025-07-23
查看zyfzxh的 主題 / 回貼
2樓  發表于: 2011-05-05 07:54
http://down.ymmfa.com/?id=24
這裡就有,
請說明樓主的版本?
aaaa0595
級別: 略有小成
精華主題: 1 篇
發帖數量: 247 個
工控威望: 304 點
下載積分: 437 分
在線時間: 77(小時)
注冊時間: 2007-07-01
最后登錄: 2024-08-05
查看aaaa0595的 主題 / 回貼
3樓  發表于: 2011-05-06 11:47
廣東工程
級別: *
精華主題: * 篇
發帖數量: * 個
工控威望: * 點
下載積分: * 分
在線時間: (小時)
注冊時間: *
最后登錄: *
查看廣東工程的 主題 / 回貼
4樓  發表于: 2011-05-06 13:21
謝謝了,樓主
song2007
song2007
級別: 略有小成
精華主題: 0
發帖數量: 110 個
工控威望: 257 點
下載積分: 500 分
在線時間: 311(小時)
注冊時間: 2007-10-31
最后登錄: 2025-07-14
查看song2007的 主題 / 回貼
5樓  發表于: 2011-05-08 16:47
songnr925@163.com
謝謝樓主的無私貢獻。
sxy
級別: 略有小成
精華主題: 0
發帖數量: 67 個
工控威望: 235 點
下載積分: 484 分
在線時間: 90(小時)
注冊時間: 2008-12-25
最后登錄: 2025-01-08
查看sxy的 主題 / 回貼
6樓  發表于: 2011-05-09 02:25
你有沒有 運動CPU  程式呢  發來研究下
good
級別: 略有小成
精華主題: 0
發帖數量: 273 個
工控威望: 489 點
下載積分: 788 分
在線時間: 46(小時)
注冊時間: 2008-04-11
最后登錄: 2022-12-10
查看good的 主題 / 回貼
7樓  發表于: 2011-05-09 21:56
能發一份給我嗎?我的是137612619@qq.com       在此謝過了
lzdcy321
級別: 略有小成
精華主題: 0
發帖數量: 120 個
工控威望: 201 點
下載積分: 682 分
在線時間: 46(小時)
注冊時間: 2010-07-16
最后登錄: 2023-04-15
查看lzdcy321的 主題 / 回貼
8樓  發表于: 2011-05-09 23:05
謝謝了,樓主!!!!!!!!!
leozhaott
級別: 探索解密
精華主題: 0
發帖數量: 28 個
工控威望: 146 點
下載積分: 610 分
在線時間: 11(小時)
注冊時間: 2011-06-20
最后登錄: 2012-08-08
查看leozhaott的 主題 / 回貼
9樓  發表于: 2011-06-21 21:51
我想要SW8RNC-GSVHELPE  用于三菱Q173DCPU的  找了好久都沒找著呢!希望有的能發一個給我!
leozhaott
級別: 探索解密
精華主題: 0
發帖數量: 28 個
工控威望: 146 點
下載積分: 610 分
在線時間: 11(小時)
注冊時間: 2011-06-20
最后登錄: 2012-08-08
查看leozhaott的 主題 / 回貼
10樓  發表于: 2011-06-21 21:53
剛剛忘了郵箱了   郵箱:673721892@qq.com
顧仁仁
級別: 略有小成
精華主題: 0
發帖數量: 338 個
工控威望: 342 點
下載積分: 533 分
在線時間: 202(小時)
注冊時間: 2007-10-28
最后登錄: 2025-06-30
查看顧仁仁的 主題 / 回貼
11樓  發表于: 2011-07-10 11:02
謝謝樓主…  jxgfguren@.163.com
  • «
  • 1
  • 2
  • 3
  • »
  • Pages: 1/3     Go

主站蜘蛛池模板: 欧洲熟妇牲交| 成人毛片100部| 丝袜 亚洲 另类 欧美 变态| 亚洲日韩色欲色欲com| 欧美性xxxx极品少妇| 日韩欧美国产第二区| 国产精品色拉拉| 久青草国产97香蕉在线视频| 国产成年女人毛片80s网站| 人妻在线日韩免费视频| 噜噜吧噜吧噜吧噜噜网a| 窝窝午夜看片| 四虎国产精品永久在线无码| 日韩插啊免费视频在线观看| 国产免费一区二区三区不卡| 国内成+人 亚洲+欧美+综合在线| 国产亚洲日韩在线三区| 国产精品美女久久久久久麻豆| 狠狠久久永久免费观看| 激情五月天开心| 天堂av无码大芭蕉伊人av孕妇| 国产萌白酱喷水视频在线播放| 欧美精品亚洲精品日韩传电影 | 国产又色又爽又刺激在线播放| 18禁强伦姧人妻又大又| 日韩乱码人妻无码系列中文字幕| 中文字幕資源免費看| 久久996re热这里只有精品无码| 国产萌白酱喷水视频在线播放| 一本大道色婷婷在线| 免费人成视频x8x8| 日韩欧美精品一中文字幕| 97久久香蕉国产线看观看| 毛片免费观看天天干天天爽| 人妻无码中文久久久久专区| 国产精品久久久天天影视香蕉| 夜夜未满十八勿进的爽爽影院| 欧美亚洲日本国产综合在线美利坚| 欧美肥熟妇xxxxx| 亚洲精品国产综合麻豆久久99| 日韩在线 | 中文|